Orbit on Oct 1, 2011, 12:35am:
why the span is adjusted so that it does not show a flat chart, on the pink noise , ???
Aleksey Vaneev on Oct 1, 2011, 6:02am:
You can change that behavior in the Spectrum Mode Editor by setting the Slope to a different value.
Orbit on Oct 2, 2011, 6:43pm:
I know that I can, but why do you set the slop like this, it also applies to other Voxengo plug-ins, must be the reason why the slop is set as it is
Aleksey Vaneev on Oct 3, 2011, 8:02am:
The reason is that higher frequencies in musical material are usually diminishingly less powerful than lower frequencies. Without such slope it may be a bit hard to monitor the higher frequencies. Moreover, classical analog spectrum analyzers have a natural +3dB/oct slope toward the higher frequencies.
Aleksey Vaneev on Oct 3, 2011, 8:06am:
If you wonder why it's +4.5 dB/oct instead of +3 dB/oct, the reason is the same - because for musical signals it's more practical.
This topic was last updated 180 days ago, and thus it was archived. Replying is disabled for this topic.
Copyright © 2002-2018 Aleksey Vaneev