|
This topic was last updated 180 days ago, and thus it can be considered old. Replying is disabled for this topic.
|
LRS
on Jun 7, 2009, 8:54pm:
Hi, I don't know whether this is specific to Tracktion or any other host as well.
I find that when I place PHA-979 on a track it immediately results in a small delay on the track I have put it on. By disabling PHA-979 then re-enabling it the delay is no longer apparent and the track can then be adjusted with PHA-979 correctly. However if I mute the track for any reason and return to it later the same behaviour will sometimes recur. Note Tracktion automatically compensates for latency in plugs.
It's not a biggie but is a little annoying. Any thoughts?
Cheers
Graham
I find that when I place PHA-979 on a track it immediately results in a small delay on the track I have put it on. By disabling PHA-979 then re-enabling it the delay is no longer apparent and the track can then be adjusted with PHA-979 correctly. However if I mute the track for any reason and return to it later the same behaviour will sometimes recur. Note Tracktion automatically compensates for latency in plugs.
It's not a biggie but is a little annoying. Any thoughts?
Cheers
Graham
Aleksey Vaneev
on Jun 7, 2009, 9:16pm:
Have you tried e.g. Elephant plug-in in the same scenario? This is a bit strange problem - I'm not sure it is caused by the plug-in.
|
This topic was last updated 180 days ago, and thus it can be considered old. Replying is disabled for this topic.
|
Copyright © 2002-2012 Aleksey Vaneev - Terms of Use - Privacy Policy - About Voxengo - Questions & Answers