Forums
Discussions
Announces, Releases and Discussions
Current Spectrum Analyzer setting not applied to new group(s)
Current Spectrum Analyzer setting not applied to new group(s)
|
This topic was last updated 180 days ago, and thus it can be considered old. Replying is disabled for this topic.
|
Dandruff
on Mar 10, 2010, 11:41am:
Aleksey,
can you please make the current Spectrum Analyzer setting also being used when adding new group(s) or changing routing presets in all your plugins that have an Analyzer?
Example:
-> one group active (2 channel, Stereo)
-> select User Spectrum preset or any other but the default preset
-> change routing to something with two groups (dual mono for example)
=> second group not using the same Spectrum preset as first one :(
Find this a bit annoying ...
can you please make the current Spectrum Analyzer setting also being used when adding new group(s) or changing routing presets in all your plugins that have an Analyzer?
Example:
-> one group active (2 channel, Stereo)
-> select User Spectrum preset or any other but the default preset
-> change routing to something with two groups (dual mono for example)
=> second group not using the same Spectrum preset as first one :(
Find this a bit annoying ...
Aleksey Vaneev
on Mar 10, 2010, 7:15pm:
Which plug-in and version are you referring to?
Aleksey Vaneev
on Mar 10, 2010, 7:22pm, edited 2 time(s), last modified on Mar 10, 2010, 7:23pm:
OK, sorry I have misread your request.
I do not see much of a problem - spectrum editor window contains "Copy to" function - you can copy your settings to any groups you need. Doing "automatic" setting copying can be problematic.
And I think you should use spectrum mode presets more actively - they can be recalled in the groups quite easily.
I do not see much of a problem - spectrum editor window contains "Copy to" function - you can copy your settings to any groups you need. Doing "automatic" setting copying can be problematic.
And I think you should use spectrum mode presets more actively - they can be recalled in the groups quite easily.
Dandruff
on Mar 10, 2010, 8:26pm, edited 1 time(s), last modified on Mar 10, 2010, 8:27pm:
That's what I'm doing - I'm using a preset. But I don't want to be forced to manually load it for each group. That should be done automatically - apply current mode to new group(s) when creating new group(s) or when loading different routing preset with different group count.
Aleksey Vaneev
on Mar 10, 2010, 9:08pm:
I understand the inconvenience, but it can be resolved by using presets - both spectrum and plug-in's presets.
Spectrum mode is no different from "compression mode", for example. While it's usually not obvious that the same compression mode should be used in all groups.
Spectrum mode is no different from "compression mode", for example. While it's usually not obvious that the same compression mode should be used in all groups.
|
This topic was last updated 180 days ago, and thus it can be considered old. Replying is disabled for this topic.
|
Copyright © 2002-2012 Aleksey Vaneev - Terms of Use - Privacy Policy - About Voxengo - Questions & Answers